Normal vs abnormal loss in production costing
Every manufacturing process loses some material. The accounting question is whether that loss stays in the product's cost or is charged as a separate expense. This guide answers it with a worked example.
The two definitions
- Normal loss: the expected, unavoidable loss under normal operating conditions, such as evaporation, trimming or a known rate of rejects.
- Abnormal loss: anything above the expected loss caused by an exceptional event, such as a machine breakdown, an operating error or defective materials.
Why the distinction matters
Normal loss is part of the real cost of production, so it is spread over the good units. Loading abnormal loss onto the product raises its cost and hides an operating problem, so it is charged as a separate expense in the period.
Worked example
Illustrative figures: a production order for 1,000 units with a total cost of SAR 24,500 (materials, labour and overhead), and expected normal loss of 2%, or 20 units. The order produced 960 good units.
| Item | Units | Calculation | Value |
|---|---|---|---|
| Total order cost | 1,000 | Materials + labour + overhead | 24,500.00 |
| Expected good output | 980 | 1,000 − 20 normal loss | |
| Cost per good unit | 24,500 ÷ 980 | 25.00 | |
| Abnormal loss | 20 | 980 expected − 960 actual, × 25.00 | 500.00 |
| Finished goods | 960 | 960 × 25.00 | 24,000.00 |
Recording it
Abnormal loss is expensed: debit abnormal loss 500, credit work in progress 500. Finished goods are received at the remainder: debit finished goods inventory 24,000, credit work in progress 24,000. Normal loss needs no entry; its cost is carried by the good units.
Practical tips
- Set each product's normal loss rate from actual data, not estimates.
- Require a recorded reason for every abnormal loss, and review recurring reasons.
- Compare unit cost across orders to catch deviations early.